19 January 2017
Munich, Germany
The PowerSkin Conference aims to address the role of building skins to accomplish a carbon neutral building stock. Topics such as building operation, embodied energy, energy generation and storage in context of façades, structure and environment are considered.
The E2VENT project was represented by DAPPOLONIA.
Wed Apr 03, 2019 @12:00AM New project flyer Our project successfully finished, but we are still happy to share our ideas and results! Check our newest flyer HERE. And you can find more information about our results on a website that presents the solution of E2VENT project.
|
Mon Jun 25, 2018 @ 8:00AM - E2VENT project FINAL meeting The E2VENT project has come, after 42 months, to its end. On Wednesday, 27th of June, the last meeting will take place at the European Aluminum Association premises and the partners will present the final outcomes resulting from the research and development activities performed under the E2VENT project. Both technical and non-technical aspects of the Project will be shown to the EC representatives and the meeting will also serve as an opportunity for them to provide the consortium with valuable feedbacks. To conclude with the words of the coordinator, “the management of the E2VENT was a personal challenge; however, I feel proud of the accomplished results”. We wish all partners the best of luck in the future optimization of the results and successful journey to the market.
|
Wed Jun 06, 2018 @12:00AM Last E2VENT workshop is approaching – meet us in Madrid! We are pleased to invite you to an Energy Efficiency public workshop to be held on 12th June in Madrid from 08:30 to 14:30.
|
Sun Jun 03, 2018 @12:00AM Successful E2VENT workshop in Prague FENIX TNT, in cooperation with the Technology Centre of the Czech of Sciences. Technology Centre provided the premises, and 30 participants met there at the workshop “E2VENT project – Horizon 2020 in practice” that took place on 30th May 2018. The workshop consisted of three parts, each part followed by a panel discussion. The first part focused on European projects in general, programme Horizon 2020 and research and development. The second part aimed to present the E2VENT project as a reference example of the H2020 project, its life cycle and results achieved so far. Three project partners including TECNALIA, ACCIONA CONSTRUCTION, and RINA CONSULTING represented the project.
|
Tue May 29, 2018 @12:00AM ICAE 2018 ICAE 2018 is an event organized by Tecnalia dedicated to providing better understanding of current and future architectural envelopes and their components, focusing on trends, technologies and developments. The conference took place from 20th to 22nd June 2018 in San Sebastian, Spain. NOBATEK introduced the E2VENT project during the workshop called “Accelerating building refurbishment in Europe thanks to innovative solutions: challenges and potential routes to overcome them”, while CARTIF and TECNALIA presented the individual parts of the E2VENT solution.
|
Sun May 20, 2018 @12:00AM E2VENT workshop in Prague is coming! FENIX TNT, in collaboration with Technology centre CAS, organizes a workshop named “E2VENT project – Horizon 2020 in practice”. The workshop takes place on May 30, 2018 in Prague at the facility of Technological centre.
|
Thu May 10, 2018 @12:00AM Report from the E2VENT Workshop in Brussels European Aluminium organized E2VENT public workshop on 19th April in Brussels, attended by 50 participants.
|
Wed May 02, 2018 @12:00AM FENIX TNT represented the E2VENT project at Building Fairs in Brno Fenix team represented the E2VENT project at Building Fairs in Brno, Czech Republic. From 25. to 28.4. 2018 visitors had a chance to see a unique presentation of all aspects of housing and house constructions, building management services, technical solutions and equipment. It was a great networking opportunity for FENIX to communicate with professionals and wide public about the European research projects.
|
Wed Apr 25, 2018 @ 8:00AM - 05:00PM International Building Fair in Brno 2018 FENIX TNT will present the E2VENT project during the International Building Fair in Brno (Czech Republic). |
Mon Apr 09, 2018 @12:00AM Final video of the E2VENT project is online! We proudly share with you the final promo video of the E2VENT project!
|
Mon Feb 26, 2018 @ 8:00AM - 05:00PM New video by FASADA FASADA made a video capturing the whole installation of the E2VENT system at demo building in Gdansk, Poland.
|
Wed Jan 31, 2018 @ 9:30AM - 02:30PM E2VENT WORKSHOP “THINK GREEN, THINK SMART FAÇADE” at BUDMA fair in Poland We are pleased to invite you to the E2VENT WORKSHOP which will be held within BUDMA - International Construction and Architectural Fair in Poznan, Poland.
|
Tue Jan 30, 2018 @ 8:00AM - 05:00PM The E2VENT project was represented by FENIX at BUDMA Fair in Poznan, Poland BUDMA is the largest construction fair in Poland and Central and Eastern Europe with more than 800 exhibitors from all over the world. It´s a unique opportunity to introduce new products to wide public and a rich source of latest market information. The E2VENT project was presented via booth, roll-up, video, gadgets, and brochures by FENIX. The fair took place in Poznan, Poland 30.1.-2.2.2018.
|
Thu Nov 30, 2017 @ 8:00AM - 05:00PM EKOinnovation Forum The forum aimed to accelerate the emergence of modern solutions into everyday life. Participants were provided with an interesting discussion of current and future trends in this area and introduced modern sustainable technologies that can provide European Union countries with global competitiveness. The E2VENT project was introduced by FENIX TNT on 30th November 2017 in Krtiny, Czech Republic.
|
Fri Oct 13, 2017 @ 8:00AM - 05:00PM Renovation day 2017 European Aluminium would like to participate in the Renovation day which will take place during 13th October 2017 in Brussels, Belgium. |
Mon Jul 10, 2017 @ 8:00AM - 05:00PM M30 Review Project Meeting The next project meeting of the E2VENT project will take place during 10th-12th July in Brussels, Belgium. Partners from across Europe will come together to review, discuss and evaluate the project’s progress and to plan next steps. Besides participants from the consortium, the meeting will be attended by the Project Officer from the European Commision. We look forward to meeting our partners again and to the opportunity to get feedback from all sides. |
Mon Jul 03, 2017 @ 8:00AM - 05:00PM PASSIVE LOW ENERGY ARCHITECTURE CONFERENCE One of our partners NOBATEK will participate in the Passive Low Energy Architecture (PLEA) Conference held in Edinburgh, 3rd to 5th July 2017 to present a paper related to the LHTES and E2VENT project. The title of the paper is: “E2VENT: an energy efficient ventilated façade retrofitting system. Presentation of the embedded LHTES system." |
Fri Jun 30, 2017 @ 8:00AM - Fourth release of the project newsletter We are pleased to inform you that the E2VENT project released the fourth newsletter. It includes all the news connected with this phase of the project. You can subscribe to get the newest information about the project via the form the on the bottom of this website.
|
Mon Jun 19, 2017 @ 8:00AM - EUSEW 2017 The E2VENT project participated in a speaking slot during the EU Sustainable Energy Week 2017 which will take place 19th–25th June 2017 in Brussels, Belgium. The E2VENT project was represented there by NOBATEK.
|
Sun Jun 11, 2017 @ 8:00AM - NSB 2017 - Nordic Symposium on Building Physics NSB 2017 - Nordic Symposium on Building Physics The Nordic Symposium on Building Physics (NSB) 2017 was a focus on the energy and hygrothermal performance of buildings and constructions.
The E2VENT project was represented by DAPPOLONIA. |
Tue May 16, 2017 @12:00AM First testings on the test bench in Anglet As the SMHRU and LHTES are now installed on the test bench in Anglet (Nobatek), a series of onsite tests is ongoing. Among those, we can list the following:
Next step is to place the mineral wool board to insulate the cell, and to place the anchorings, profiles and cladding for the ventilated façade.
|
Mon May 15, 2017 @ 8:00AM - ICBEST 2017 ICBEST 20177 - International Conference on Building Envelope System and Technologies Paolo Basso from D’Appolonia presented a paper related to the E2VENT project during the International Conference on Building Envelope Systems and Technologies (ICBEST), which took place 15th–18th May 2017 in Istanbul. The presentation was dedicated to the design of the E2VENT and its integration with the building system. ICBEST is a worldwide forum for building envelope architecture and engineering. It provides information exchange, networking, and discussions of recent developments and their application thus bridging the gap between architects, designers, engineers, manufacturers, and researchers. During the industry exhibition, top international companies will be showcasing products and technology solutions of interest to conference attendees. Read more about the conference: www.icbestistanbul.com
|
Wed Apr 26, 2017 @ 8:00AM - IBF – International Building Fair The E2VENT project will be exhibited by FENIX TNT at the International Building Fair in Brno, Czech Republic. The event will take place on the 26th – 29th March, 2017. Fairs in Brno are well known for unique presentation of all aspects of housing and house constructions, building management services, technical solutions, equipment, interior design and furniture. Visitors can learn about the latest developments, trends, products and services in various fields. More pictures here.
|
Mon Apr 03, 2017 @12:00AM SMHRU & LHTES installation on test bench After measurements carried out in the laboratories of TECNALIA and NOBATEK, new version of the SMHRU and LHTES have been designed and next manufactured by ELVAL. The systems were next sent to Anglet in order to be assembled and installed on the test bench.
|
Mon Mar 06, 2017 @12:00AM Test bench, and renovation of the reference cell with ETICS The test bench that will be used is located in Nobatek, in Anglet, France. It will be used in order to carry out the first renovation with the E2VENT module in order to test, improve and finalize its design, installation process and its control. Then it will allow to compare the overall energy efficiency of the E2VENT Module against competitive solutions. The test bench is composed of three cells that will all be renovated with different systems:
During the first period, some works on the test bench were carried out. Windows were taken out, and concrete blocks were built on the three cells. It represent the low efficient walls from the 70’s. Next step is to install the SMHRU and LHTES on the test bench. More pictures here.
|
Tue Feb 28, 2017 @ 8:00AM - The third Newsletter released The third newsletter of the E2VENT project designed by FENIX TNT has been released. Would you like to learn more about the project? Subscribe to the E2VENT newsletter on the bottom of the project website! |
Wed Feb 22, 2017 @ 8:00AM - 05:00PM M24 meeting The next general meeting (M24) will take place in Anglet, France on the 22nd and 23rd of February. This meeting is the opportunity to evaluate the project progress. It will take place few days after the test bench retrofitting and will bring about a workshop concerning any needed redesign concepts for the prototypes based on the feedbacks received. Various other workshops will be conducted in order to deal with the retrofitting of the pilot buildings in Gdansk and Burgos.
|
Wed Jan 25, 2017 @ 8:00AM - 12:00AM BRIMEE conference The E2VENT project was exhibited during BRIMEE Conference organized by FENIX TNT. The conference took place on the 25th January 2017 at the Rectorate Brno University of Technology in Brno, Czech Republic.
|
Thu Jan 19, 2017 @ 8:00AM - PowerSkin Conference 19 January 2017 The PowerSkin Conference aims to address the role of building skins to accomplish a carbon neutral building stock. Topics such as building operation, embodied energy, energy generation and storage in context of façades, structure and environment are considered. The E2VENT project was represented by DAPPOLONIA. |
Mon Jan 16, 2017 @ 8:00AM - BAU 2017 The E2VENT project was exhibited by FENIX TNT on BAU17, the World’s Leading Trade Fair connected with civil engineering, which took place in Munich, Germany on the 14th – 19th January 2017. BAU presented a display of architecture, materials and systems for commercial and residential construction and interior design, for both new-build and R&M projects.
|
